ELOG - CDS update

Richardson Lab Experimental Log

Not logged in

List | Find | Login | Help

Message ID: 592 Entry time: Wed Jun 11 16:19:37 2025

Fast channels recorded to .gwf frame files
- Had to add a DAQ Channels block to the c1msc model for those channel to be recorded in the .gwf frame files. The block is in the CDS_PARTS, and I just had to copy it to our model. Here is the example text for the channels:
  
  #DAQ Channels
  
  ONE_DAQ_CHANNEL 2048
  ANOTHER_DAQ_CHANNEL 1024
  SCIENCE_FRAME_CHAN* 1024
  UINT32_CHAN uint32 2048
  DAQ_CHANNEL_AT_DEFAULT_RATE
  I added two channels to the list (V0 and V1). Remember that the channel name should not be the full name, but just the part's name. In this case, I added these two channel names:
  
  V0_OUT
  V1_OUT
  
  with the default sample rate.
The fast channels are recorded with an extra _DQ in their names. So, in ndscope and diaggui these two channels should be addressed as
- C1:MSC-V0_OUT_DQ
- C1:MSC-V1_OUT_DQ

Update 6/13: enabled recording of all the ADC voltage channels so that Tyler can use all the data for the noise floor calculation. attached is an example of diagggui with almost 30 hrs of data.

Attachment 1:

Attachment 2:

f3k.pdf 218 kB Uploaded Fri Jun 13 20:58:21 2025 | Show | Show all