ligo-ex ligo-ds
  Richardson Lab Experimental Log  Not logged in ELOG logo
Message ID: 547     Entry time: Mon Apr 7 13:28:49 2025
Author: Xuesi Ma 
Type: Update 
Category:  
Subject:  

Test 1: Adapter Board Connected to Filter Board

  • Setup: AI Chassis is powered on. Signal is measured directly from the adapter board. All other ports on the adapter board are connected to the filter board.
  • Observation: Two distinct spikes observed at the beginning of the measurement.

Test 2: Adapter Board Disconnected from Filter Board

  • Setup: AI Chassis remains powered on. Signal is again measured directly from the adapter board. This time, the remaining ports on the adapter board are not connected to the filter board.
  • Observation: Multiple spikes observed, distributed evenly across the entire measurement.

Test 3: Isolation Test with Spare Adapter Board (ongoing)

  • Setup: Suspecting the original adapter board may be faulty, a spare adapter board is used for comparison. Signal is measured directly from this spare board.
Attachment 1: 20250403_151946.jpg  1.127 MB  | Hide | Hide all
20250403_151946.jpg
Attachment 2: ELOG_Spike_adapter_filter_on.png  47 kB  | Hide | Hide all
ELOG_Spike_adapter_filter_on.png
Attachment 3: 20250404_143624.jpg  1.053 MB  | Hide | Hide all
20250404_143624.jpg
Attachment 4: ELOG_Spike_adapter_isolate.png  49 kB  | Hide | Hide all
ELOG_Spike_adapter_isolate.png
Attachment 5: 20250407_105846.jpg  648 kB  | Hide | Hide all
20250407_105846.jpg
ELOG V3.1.3-7933898