cleaning cleanroom and particle count

NOTE: particle counter was found dead, with the charging dock unplugged. For future reference, if you need to unplug the dock, please either plug it back in when you're done, or make a note in an elog so someone else can come down and charge it.

• 1:07 pm: ran zero count test on particle counter
• 1:26 pm: started particle count
  • zone 3:
    • 0.3 u:1787
    • 0.5 u:457
    • 1.0 u:41
• zone 4: We were only able to charge the particle counter a small amount before starting the cleaning, so it died again halfway through this measurement, and we didn't get results for zone 4. In interest of time, we just put it on the charger and started the cleaning.
• 1:49 pm: began surface check and wipedown, including softwalls
• 2:16 pm: started vacuuming the floor
• 2:24 pm: finished vacuuming the floor
• 2:26 pm: started mopping the floor
• 2:32 pm: finished mopping the floor
• 2:32 pm: started cleaning the buckets
• 2:35 pm: started mopping with IPA wipes
• 2:43 pm: finished mopping with IPA wipes
• 2:43 pm: changed sticky floor mats
• 2:45 pm: started particle count
  • zone 3:
    • 0.3 u: 1288
    • 0.5 u: 124
    • 1.0 u: 0
• zone 4:
  • 0.3 u: 415
  • 0.5 u: 290
  • 1.0 u: 0