ligo-ex ligo-ds

Richardson Lab Experimental Log  Not logged in

List  |  Find  |  Login  |  Help

Message ID: 149     Entry time: Thu Jul 6 18:03:19 2023 Author: Pamella  Type: Update  Category: FLIR  Subject: FLIR project - New configuration

[Pamella] Cao suggested using the project without the reflector and mask because in this case we probably got good images around the screen. So I started this yesterday and today I started to get some data to see the stabilization position and check how the parameters fluctuated. I was looking and taking snaps for an hour and a half. I'll repeat this one more time to make sure we have enough data to do analysis. To do: The next step is to start collecting data by moving the camera FLIR and covering all six positions on the screen (2x3). Also Aiden is on hand to help and is going to make a new 3D print bridge to have good heater support. I attached a image for the new configuration below and a snap data.

Attachment 1: IMG_8193.jpeg  3.404 MB  | Show | Hide all | Show all

Attachment 2: IMG_8183.jpeg  3.327 MB  | Hide | Hide all | Show all

Attachment 3: AcquisitionImage(Jul-06-2023_17_18)_(1).jpg  24 kB  | Hide | Hide all | Show all

Attachment 4: region_temperature1.jpg  24 kB  Uploaded Thu Jul 6 19:22:37 2023  | Show | Hide all | Show all

ELOG V3.1.3-7933898